Power Elec Lab

Power Elec Lab

F28M35 DSK (Concerto) Designed specifically for Universities

Control industrial process with a powerful Dual-core ARM+DSP

$499 / unit / 3 months warranty

Description

The F28M35H52 family, known as Concerto, is a dual-core (ARM+DSP) processor suitable for safety-sensitive applications. The ARM processor supports Ethernet, USB OTG, CAN, UART, SSI, I2C, and an external GPIO. The DSP is the industry-leading 32-bit C28x floating-point CPU with ePWM and encoder. A high-speed analog-to-digital converter is shared between the two cores.*

Currently, only the hardware for F28M35 DSK is available; documentation is still under development. We expect to have the documentation available soon. If you are interested in purchasing the hardware and software without documentation, please contact us.

 

Introduction

The F28M35H52 family, known as Concerto, is a dual-core (ARM+DSP) processor suitable for safety-sensitive applications. The ARM processor supports Ethernet, USB OTG, CAN, UART, SSI, I2C, and an external GPIO. The DSP is the industry-leading 32-bit C28x floating-point CPU with ePWM and encoder. A high-speed analog-to-digital converter is shared between the two cores.For sensitive control applications, the shared memory includes Error Correction Code (ECC) and secure memory. The F28M35 DSK is based on the F28M35H52C processor with external hardware for Ethernet, isolated CAN, isolated RS422, and UART. The code is compatible with TMDSCNCDH52C1. The F28M35H52 comes with a comprehensive training manual, which covers the code details and step-by-step instructions to use the board.

Compatible with ezdsp F2812

EZDSP F2812 is a well-known DSK which has been used in control applications for many years. The dimension of F28M35 DSK is compatible with EZDSP F2812 and can replace this board for new designs. The physical dimension and the location of the analog and PWM connectors are identical on both boards. This diagram shows the matching connectors on the two boards.

Technical Specification

 

  • Dual-core F28M35H52C system-on-chip MCU: ARM core + Floating-point C28x DSP core
  • 20-channel analog input with two 12-bit ADCs. The maximum sampling frequency is 2.88 Mhz.
  • One electrically isolated CAN port
  • One UART port (Tx and Rx) 
  • Two electrically isolated RS422 ports (the two RS422 channels can be isolated upon request)
  • One Ethernet channel
  • One OTG USB port
  • 18 PWM or Digital input/output pins
  • 5V to 12V power supply
  • 14-pin standard JTAG connection
  • 6 layers PCB
  • -40C to +80C working temperature 
  • Can be programmed by Code Composer Studio

Document

The document for 28M35 DSK is currently in the final stage of review and would be available soon. Please check back here.

This document enables students with no knowledge of DSP to work and understand all the software steps to program F28M35H52C1. The document has a separated chapter for each peripheral and explains the code as if the user has no knowledge of DSP programming. This can be very helpful for students with very little exposure to DSP.

What you’ll receive

 

1-  F28M35 DSK hardware
2-  Documentation (under development)
3-  Adaptor
4-  DVD
5-  USB, Ethernet, and serial cables